- Built-in TCP/IP & RS-485 communication interfaces for connecting to PC
- Supports 100,000 cardholders
- Supports 30,000 events
- Built-in 32 relays for 32 floor control; Expandable to connect MCU-0016 x 4
- Supports to control 96 floors in total for each elevator
- Supports to connect Wiegand (or RS-485) readers x 2 for each elevator
Features
- Built-in TCP/IP & RS-485 communication interfaces for connecting to PC
- Supports 100,000 cardholders
- Supports 30,000 events
- Built-in 32 relays for 32 floor control; Expandable to connect MCU-0016 x 4 to control 64 floors
- Supports to control 96 floors in total for each elevator
- Supports to connect Wiegand (or RS-485) readers x 2 for each elevator
- Provides 3 sensor inputs for fire signal detection or maintenance button, out-of-service button and emergency button.
- A mode switch to change the modes among maintenance, out-of-service or normal modes
- Provides 3 relays for connecting blacklist / Emergency alarm, maintenance strobe or out-of-service strobe
- Automatically release all floor controls for free access once a fire signal is detected
- Provides 256 groups of time schedules; Each group of time schedule includes a whole week (7days) time schedules ; Each day allows 8 time schedules settings
- Provides free access time schedules for each floor and be configurable whetherthis free access function will be disabled automatically on holidays.
- Provides two groups of holiday setting; Each holiday group supports 100 holidays per year
- Blacklist function to deter criminals
- Built-in flash memory, data can be saved more than 1 year after power off.
- Built-in RTC battery, Real-Time-Clock will keep operating for 1 year after power off.
- RTC (Real Time Clock) and Watchdog function ensure accurate date/time and system free from halting.
Specification
Model |
HDE-120 |
Inputs |
3 sensors |
Outputs (Built-in) |
Built-in 32 relays (for 32 floor control) and 3 relays (for alarms / strobes) |
Outputs (External) |
MCU-0016 x 4 (max.) |
Cardholders |
100,000 |
Events |
30,000 |
LED Indicator |
G LED × 1 (PWR)、 R LED × 35 ( 32+3 Relay LEDs)、R/G LED× 3 (COMM) |
Real Time Clock |
Yes |
ID Setting |
By DIP Switch |
Comm. Interface |
To PC :TCP/IP × 1 ;RS-485 × 1 |
Reader Ports |
Wiegnad & RS-485 |
Power Input |
DC 12V / 2.5A (excluding readers) |
Transmission Speed |
TCP/IP: 10 / 100M bps ; RS-485:19200bps-N-8-1 |
Operating Temp. |
-40° C ~ 70° C / -40° F ~ 158° F |
Relative Humidity |
20% ~ 80% (Non-condensing) |
Dimensions |
245 X 149 X 33 (mm) |
Related Products
Downloads
Type
Name
Format
Downloads
Supported Hardware
MCU Series
I/O Control Panel